Step 1 Dezigns superior quality 12V DC RGB LED Tape light kits are made with commercial-grade PCBs to ensure our color-changing RGB LED strips last longer and run cooler with high consistency and even illumination. It is the perfect lighting solution for tradeshows, exhibitions lighting, retail display lighting, back-lighting application, and more. The color consistent RGB LED Tape Light is only 0.39” (10mm) wide and made with wire leads and connectors on the end of each 16 ft reel and can be cut every 2 in. at its cut mark. Each kit includes one 12V DC LED driver and one RGB LED Controller with 44 key Remote. Available in Indoor Dry Location Rated IP20 or Outdoor Wet Location Rated IP65 Kit options.
Step 1 Dezigns superior quality 12V DC LED RGB Tape Lights are made with commercial-grade PCBs to ensure our color-changing RGB LED strips last longer and run cooler with high consistency and even illumination. It is perfect for exhibit and display lighting, kitchen lighting, pool lights, home theater lighting, boat lights, or commercial lighting, and lighting design for museum lighting, architectural lighting, and restaurant lighting applications. Each run of LED RGB Tape Light requires RGB LED Power Feeds, LED Driver, and Controller, sold separately, see related products.
The 12V DC and 24V DCColor-changing LED light strip 12 in. segments are commonly used for exhibit and display lighting, kitchen lighting, pool lights, home theater lighting, boat lights, or commercial lighting, and lighting design for museum lighting, architectural lighting, and restaurant lighting. Each segment is 12 in. in length with pre-installed modular connectors at each end. You can utilize LED strip light joiner and power feed for a solder-free installation. It is sold in 12 in. Segments and cuttable every 4" at its cutting mark. Each run of the LED RGB Tape Light requires RGB Power Feed, RGB LED Controller, and compatible 12V DC or 24V DC LED Driver. Sold Separately. See Related Products.
The RGB LED 24-key Infrared Controller with Remote comes with the most advanced micro control unit. It is compatible with our 12V RGB LED Tape Light Strips. It is easy to install with Plug N Play connector and easy to use. For instance, you could change the color of the LED light by pressing one of the 16 color buttons. The light will also rotate through preprogrammed colors when the Flash, Strobe, Fade, and Smooth buttons are pressed. The two buttons in the top left corner of the remote controls both the brightness of a selected color and the speed of the Flash, Strobe, Fade, and Smooth modes.
The RGB Controller with Remote contains nine pre-programmed color-moving sequences, including speed adjustment and pause features. Includes hand held remote. 12VDC or 24VDC Power Supply Required (not included).
• Use wireless remote within 100 feet, or control manually by the keys on the controller panel
• Three channel RGB control. Max 6A each channel
• Up to 31 changing modes to select, 256 grey level changing
• Each mode can select changing speed and overall brightness separately
The RGBW Touch Controller is easy to install and use. It is perfectly designed for Step 1 Dezigns RGB or RGBW LED tape and strip lights, mixing RGB and white. The RGBW Touch Controller with Remote Unit contains 12 dynamic modes, 8 dimming scales, 8 dimming speeds and comes with remote.
The RGBW data repeater is required for runs which exceed the wattage of the initial driver. An additional driver in conjunction with the repeater is required to power extended runs. Power supply required (not included).