Close
0 items
You have no items in your shopping cart.
OUR LED PRODUCTS
    Filters
    Preferences
    Search

    LED RGB Tape Light Kits 12V DC 16 ft Reel

    $30.40
    Step 1 Dezigns superior quality 12V DC RGB LED Tape light kits are made with commercial-grade PCBs to ensure our color-changing RGB LED strips last longer and run cooler with high consistency and even illumination. It is the perfect lighting solution for tradeshows, exhibitions lighting, retail display lighting, back-lighting application, and more. The color consistent RGB LED Tape Light is only 0.39” (10mm) wide and made with wire leads and connectors on the end of each 16 ft reel and can be cut every 2 in. at its cut mark. Each kit includes one 12V DC LED driver and one RGB LED Controller with 44 key Remote. Available in Indoor Dry Location Rated IP20 or Outdoor Wet Location Rated IP65 Kit options.
    SKU: STVO12RGB-KIT
    *

    Step 1 Dezigns 12V DC Color Changing RGB LED Flexible LED Strip Lights Kit are perfect for tradeshows, exhibitions, architectural, accent lighting applications. It can be used for back-lighting, signage, wall-washing, pathway lighting, and decorative lighting. It is cuttable every 2” (at its marked cutline). Sold in 16 ft Reels with LED power supply and remote controller included.

    Available to order in IP65 Outdoor Rated or IP20 Dry Location options. The color of this RGB LED Tape Light kit can be adjusted from Red, Green, to Blue with various mode settings such as Flash, Fade, etc. 

    The RGB LED 12V DC Tape Light Kits are made with wire leads on the ends of each 16 ft reel and can be cut every 2 inches at its cut marking points, allowing you to cut pieces to the length desired.

    Features:

    • Maintenance-free
    • Solid-State Construction
    • High shock and Vibration Resistance
    • SMD 5050 LEDs Chipsets are high intensity, ultra-bright, and energy-efficient
    • No RF interference
    • Up to 50,000 hours Lifespan
    • CE Listed, RoHs

    Applications:

    • Decorative Lighting for Tradeshows, Exhibition, Retail Displays
    • Architectural lighting for corridors, canopies, archways, or windows
    • Downlighting or Uplighting Applications
    • Backlighting or edge-lighting for sign letters
    • Under-cabinet, Under-Counter, or cove lighting
    • Custom DIY projects
    Products specifications
    Voltage 12V DC
    Power Consumption 3w per ft.
    LED Color RGB
    Brightness 500 Lumen per ft.
    Number of LED Chips 18 per ft.
    LED Chip Size 5050
    Beam Angle 120°
    Length 16 ft.
    Dimension 3/8" W x 5/64" H
    Lifespan ± 30,000 - 50,000 hours
    Installation Adhesive Back Tape
    Included items Plug N Play Power Feed and Connectors, (1) 12v Power Supply, (1) Controller with 44 key remote
    Environment/IP Rating Wet/Dry Location or Dry Location Only
    Remarks Cuttable every 2" at the cut mark

    Choosing the compatible power supply for LED Tape lights can be a challenge. Step 1 Dezigns LED tape light strips are either 12V DC or 24V DC which require a constant low voltage power supply to run the led strips. The LED power supply (also known as LED driver or transformer) which connects to a 120V AC power source and converts the current to 12V or 24V DC. The most commonly used voltage used in commercial or residential application is 12V DC or 24V DC. The Low voltage output provides the most safety and protection and consumes less current.

    Let’s start with the basics. The LED power supply is to provide the correct amount of electrical current to LED lights so that they do not overheat or fail prematurely due to overloading. It also regulates the flow of current to your tape lights to ensure the best functionality. Since Step 1 Dezigns LED strips are customizable in different lengths and sizes, and the compatible LED power supply would depend on the LED tape lights Voltage and wattage. All LED Strips are Dimmable when used with compatible LED driver.

    Follow the step by step instructions and example in Orange to find out which power supply will be suitable for your application.

    Important Factors to consider when selecting the right LED Driver:

    1. Input Voltage of the LED Driver: 110-277V AC
    2. Output Voltage of the LED Driver: 12V DC or 24V DC
    3. Power Consumption of the LED Strip Light (Wattage per ft)
    4. Total Run of LED Strip Light (Total Length in ft)
    5. Dimmable or Non-Dimmable

    *You can find the above factors from each product page or specification sheet on our Web Site. The recommend the max run of LED strips light is 32 ft before requiring an additional power supply.

    Step 1. Check the Voltage of your LED Tape Light. Determine if the LED tape light is 12V DC or 24V DC. Check for markings indicated on the LED strip or the product specifications at step1dezigns.com. This step is very important because of the wrong supply voltage could be a safety hazard or cause malfunction of the tape light.

    For our example project, we will use 6 ft of the 12V DC LED Standard Tape Light.

    Step 2. Check the watts per ft. This is also important in determining what size of LED Driver you will require. If you have insufficient power feeding to the LED strips, it may cause a flicker, or diming, or will not light up at all. The power consumption can be found in the product specifications.

    Step 3. To Calculate the power usage, use the following formula:

    Power (watts per ft) x Length (ft) = Total Power Consumption (Watts)

    So in our continued example, the 12V DC LED Standard Tape Light is rated at 2.4w/ft, so:

    2.4 w/ft x 6 ft= 14.4 watts

    Step 4. When selecting the LED power supply, it's always advisable to de-rate the power load by 10% to increase the lifespan of the LED Driver. This can be done by dividing the total power or wattage of the LED strip by 0.9.

    Our continued example would be 14.4w / 0.9 = 16 watts minimum driver capacity.

    Step 5. Once you have identified voltage and calculated the total power consumption, you can select the power supply which would depend on your installation or application. Step 1 Dezigns offer a wide variety of LED Drivers including dimmable and non-dimmable drivers.

    To complete our example, the required driver for this application would be a 12V DC LED Driver that has a minimum of the required 16 watts load.

    Visit our LED Drivers page to see our selection.

    If you have any questions about choosing your power supply, please do not hesitate to give us a call at 949-270-0250 or email [email protected].

     

    *
    *
    *

    Step 1 Dezigns 12V DC Color Changing RGB LED Flexible LED Strip Lights Kit are perfect for tradeshows, exhibitions, architectural, accent lighting applications. It can be used for back-lighting, signage, wall-washing, pathway lighting, and decorative lighting. It is cuttable every 2” (at its marked cutline). Sold in 16 ft Reels with LED power supply and remote controller included.

    Available to order in IP65 Outdoor Rated or IP20 Dry Location options. The color of this RGB LED Tape Light kit can be adjusted from Red, Green, to Blue with various mode settings such as Flash, Fade, etc. 

    The RGB LED 12V DC Tape Light Kits are made with wire leads on the ends of each 16 ft reel and can be cut every 2 inches at its cut marking points, allowing you to cut pieces to the length desired.

    Features:

    • Maintenance-free
    • Solid-State Construction
    • High shock and Vibration Resistance
    • SMD 5050 LEDs Chipsets are high intensity, ultra-bright, and energy-efficient
    • No RF interference
    • Up to 50,000 hours Lifespan
    • CE Listed, RoHs

    Applications:

    • Decorative Lighting for Tradeshows, Exhibition, Retail Displays
    • Architectural lighting for corridors, canopies, archways, or windows
    • Downlighting or Uplighting Applications
    • Backlighting or edge-lighting for sign letters
    • Under-cabinet, Under-Counter, or cove lighting
    • Custom DIY projects
    Products specifications
    Voltage 12V DC
    Power Consumption 3w per ft.
    LED Color RGB
    Brightness 500 Lumen per ft.
    Number of LED Chips 18 per ft.
    LED Chip Size 5050
    Beam Angle 120°
    Length 16 ft.
    Dimension 3/8" W x 5/64" H
    Lifespan ± 30,000 - 50,000 hours
    Installation Adhesive Back Tape
    Included items Plug N Play Power Feed and Connectors, (1) 12v Power Supply, (1) Controller with 44 key remote
    Environment/IP Rating Wet/Dry Location or Dry Location Only
    Remarks Cuttable every 2" at the cut mark