0 items
You have no items in your shopping cart.

    RGB LED Controllers

    View as Grid List
    Sort by

    RGB LED Lumastrip 8 Key RGB Controller

    The 8 Key RGB Controller is designed for our Lumastrip L.E.D. Light Bars. At such a low price and with an easy connection and simplicity of use, you can adjust brightness, static color choices and various dynamic changes in lighting effectives through the wireless remote control.

    RGBW LED 4-Channel DMX 512 Decoder

    The DMX decoder with XLR provides a necessary interface between our LED DMX Controller, or lighting control software, and color-changing LED lighting, allowing for full control of color and other variables in your LED light. This tool translates digital DMX signals from an LED color controller of DMX software into an analog signal that commands LED fixtures.

    • • Advanced Micro Control
    • • Energy Efficient
    • • Easy Installation

    3-Pin DMX Cable

    22 AWG stranded (0.15 x 19 ) tinned copper conductors, polyethylene insulation, twisted pair, polyethylene inner jacket, Duofoil® (100% coverage) and cotton plus a tinned copper braid shield (85% coverage), PVC jacket.

    DMX Extend Link Cable for LED Window Lights

    DMX 3-Pin Extension Cable with Male and Female connectors for RGB LED Window Lights. Available in 9.84 ft. (3 meter) or 16.4 ft. (5 meter) length options. IP65 Outdoor rated.

    DMX Controller 192 Channel Operator

    Use this sophisticated controller to create custom scenes utilizing 192 DMX channels.

    RGB DMX Controller

    Unit has two, four-wire secondary outputs and LCD screen. Seven static colors to choose from. 24 color changing sequences and Auto Mode allowing a user to use this with a DMX operating board for custom lighting scenes. 12VDC or 24VDC power supply required (Not included).

    RGB Controller with Remote

    The RGB Controller with Remote contains nine pre-programmed color-moving sequences, including speed adjustment and pause features. Includes hand held remote. 12VDC or 24VDC Power Supply Required (not included).

    • • Use wireless remote within 100 feet, or control manually by the keys on the controller panel
    • • Three channel RGB control. Max 6A each channel
    • • Up to 31 changing modes to select, 256 grey level changing
    • • Each mode can select changing speed and overall brightness separately
    • • Level brightness and speed adjustment
    • • Change and Pause function
    • • Mode, suspend protection and memory function
    • • Soft switch function

    RGB LED 24-key Infrared Controller with Remote

    The RGB LED 24-key Infrared Controller with Remote comes with the most advanced micro control unit. It is compatible with our 12V RGB LED Tape Light Strips. It is easy to install with Plug N Play connector and easy to use. For instance, you could change the color of the LED light by pressing one of the 16 color buttons. The light will also rotate through preprogrammed colors when the Flash, Strobe, Fade, and Smooth buttons are pressed. The two buttons in the top left corner of the remote controls both the brightness of a selected color and the speed of the Flash, Strobe, Fade, and Smooth modes.

    • • Use wireless remote up to 50 feet
    • • 3 channel RGB control. Max 12A Output Current
    • • Up to 31 changing modes to select, 256 grey level changing
    • • Each mode can select changing speed and overall brightness separately
    • • Level brightness adjustment
    • • Static Colors, Flash, Strobe, Fade, or Smooth functions
    • Requires 12V LED Power Supply, Sold Separately, See Related Products

    RGB+W Touch Controller with Remote

    RGB+W Touch Controller with Remote Unit contains 12 dynamic modes, 8 dimming scales, 8 dimming speeds and comes with remote.

    RGB+W Data Repeater

    The RGB+W data repeater is required for runs which exceeds the wattage of the initial driver. An additional driver in conjunction with the repeater is required to power extended runs. Power supply required (not included).