LED Saber Tube Lights 12V

Stainless Steel with Plastic Finish U Shape Clip for LED Saber Lights and T8 size bulbs.

The Female DC Hardwire Adapter Plug is compatible with 24V LED Tape Lights.

The Male DC Hardwire Adaptor Plug (STDC-DC-M2.1 or STDC-DC-M2.5) is compatible with 12V or 24V LED Tape Lights.

For use with 24V LED tape light. Simply plug in the male end of your power supply to the female ends of the Y-Connector Power Feed.

2.1 mm Male-Female DC Extension Cable Available in 3', 6', or 10' length.

This regulated LED Pre-Wired Class 2 Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recessed.

This LED driver convert the AC input voltage to 12VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 12V LED Tape Light or Puck Light Kit.

Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.

The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.

Features:
• Efficient and reliable switching driver
• Class II Double Insulation
• UL Listed, CE and FCC approved

This regulated 12VDC 100W Pre-Wired Class 2 Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recessed.

This LED driver convert the AC input voltage to 12VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 12V LED Tape Light or Puck Light Kit.

Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.

The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.

Features:
• Efficient and reliable switching driver
• Class II Double Insulation
• UL Listed, CE and FCC approved

The Class 2 LED Dimmable Driver can supply 12V DC voltage to any kind of low voltage LED fixtures. Rated for Indoor and Outdoor Use. Primary manually reset circuit breaker is standard. Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.

The Class 2 LED Dimmable Driver can supply 12V DC voltage to any kind of low voltage LED fixtures. Rated for Indoor and Outdoor Use. Primary manually reset circuit breaker is standard. Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.

The Class 2 LED Dimmable Driver can supply 12V DC voltage to any kind of low voltage LED fixtures. Rated for Indoor and Outdoor Use. Primary manually reset circuit breaker is standard. Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.

The LED Driver 60W can supply 12V DC voltage to any kind of low voltage LED fixtures. Rated IP67.

The LED Constant Voltage Driver 100W can supply 12V DC voltage to any kind of low voltage LED fixtures. Rated IP66.

LED Single Channel Driver is a 75W single-output enclosed type power supply with 30mm of low profile design. Adopting the full range 85-264 VAC input, it provides an output voltage line of 12V.

It has high efficiency up to 91.5%, the design of metallic mesh case enhances the heat dissipation of STVOFL7512 that the driver operates from -30°C through 70°C under air convection without a fan. Delivering an extremely low no load power consumption (less than 0.3W), it allows the end system to easily meet the worldwide energy requirement. It has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

• Universal AC Input/ Full Range
• Withstand 300VAC surge input for 5 seconds
• Protections: Short circuit / Overload/ Over Voltage
• Cooling by free air convection
• Miniature size and ultra low profile
• Compliance to IEC/EN 60335-1(PD3) and IEC/EN61558-1, 2-16 for household appliances
• High efficiency, Long life and high reliability

LED Single Channel Driver is a 100W single-output enclosed type power supply with 30mm of low profile design. Adopting the full range 85-264 VAC input, it provides an output voltage line of 12V.

It has high efficiency up to 91%, the design of metallic mesh case enhances the heat dissipation of STVOFL10012D that the driver operates from -30°C through 70°C under air convection without a fan. Delivering an extremely low no load power consumption (less than 0.3W), it allows the end system to easily meet the worldwide energy requirement. It has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

• Universal AC Input/ Full Range
• Withstand 300VAC surge input for 5 seconds
• Protections: Short circuit / Overload/ Over Voltage
• Cooling by free air convection
• Miniature size and ultra low profile
• Compliance to IEC/EN 60335-1(PD3) and IEC/EN61558-1, 2-16 for household appliances
• High efficiency, Long life and high reliability

LED 2 Channel Driver is a 150W enclosed type power supply with low profile design. Adopting the full range 85-132VAC/170-264VAC input by switch, it provides an output voltage line of 12V.

It has high efficiency up to 91%, the design of metallic mesh case enhances the heat disipation of STVOFL15012D that the driver operates from -30°C through 70°C under air convection without a fan. Delivering an extermely low no load power consumption, it allows the end system to easily meet the worldwide energy requrement. It has the complete protection functions and 5G antivibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

• AC input range selectable by switch
• Withstand 300VAC surge input for 5 seconds
• Protections: Short circuit / Overload/ Over Voltage
• Cooling by free air convection
• Miniature size and ultra low profile
• Compliance to IEC/EN 60335-1(PD3) and IEC/EN61558-1, 2-16 for household appliances
• High efficiency, Long life and high reliability

LED 3 Channel Driver is a 350W enclosed type power supply with low profile design. Adopting the full range 90-132VAC/180-264VAC input by switch, it provides an output voltage line of 12V.

It has high efficiency up to 85%, the design of metallic mesh case enhances the heat dissipation of STVOFL32012D that the driver operates from -25°C through 70°C under air convection with a fan. Delivering an extremely low no load power consumption, it allows the end system to easily meet the worldwide energy requirement. It has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

• AC input range selectable by switch
• Withstand 300VAC surge input for 5 seconds
• Protections: Short circuit / Overload/ Over Voltage/ Over Temperature
• Forced air cooling by built-in DC fan
• Ultra low profile
• High efficiency, Long life and high reliability