LED Flexi-Light Grid Panel

This regulated 24VDC 100W Pre-Wired Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recess.

This LED driver convert the AC input voltage to 24VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 24V LED Tape Light or Puck Light Kit.

Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.

The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.

Features:
• Efficient and reliable switching driver
• UL Listed, CE and FCC approved

The Class 2 LED Dimmable Driver can supply 24V DC voltage to any kind of low voltage LED fixtures. Rated for Indoor and Outdoor Use. Primary manually reset circuit breaker is standard. Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.

The Class 2 LED Dimmable Driver can supply 24V DC voltage to any kind of low voltage LED fixtures. Rated for Indoor and Outdoor Use. Primary manually reset circuit breaker is standard. Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.

The Class 2 LED Dimmable Driver can supply 24V DC voltage to any kind of low voltage LED fixtures. Rated for Indoor and Outdoor Use. Primary manually reset circuit breaker is standard. Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.

This 10-watt 24v DC LED driver will power your LED lighting fixtures and it has overload, short circuit, and over heat protection.

This 20-watt 24v DC LED driver will power your LED lighting fixtures and it has overload, short circuit, and over heat protection.

The LED Class 2 Constant Voltage Driver 100W can supply 24V DC voltage to any kind of low voltage LED fixtures. Rated IP66.

LED Single Channel Driver is a 100W single-output enclosed type power supply with 30mm of low profile design. Adopting the full range 100-240VAC input, it provides an output voltage line of 24V.

The LED Single Channel Driver has high efficiency up to 91%, the design of metallic mesh case enhances the heat dissipation of STVOFL10024D that the driver operates from -30°C through 70°C under air convection without a fan. Delivering an extremely low no load power consumption (less than 0.3W), it allows the end system to easily meet the worldwide energy requirement. It has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

• Universal AC Input/ Full Range
• Withstand 300VAC surge input for 5 seconds
• Protections: Short circuit / Overload/ Over Voltage
• Cooling by free air convection
• Miniature size and ultra low profile
• Compliance to IEC/EN 60335-1(PD3) and IEC/EN61558-1, 2-16 for household appliances
• High efficiency, Long life and high reliability

LED 2 Channel Driver is a 150W 2-Channel enclosed type power supply with low profile design. Adopting the full range 85-132VAC/170-264VAC input by switch, it provides an output voltage line of 24V.

It has high efficiency up to 91%, the design of metallic mesh case enhances the heat dissipation of STVOFL15024D that the driver operates from -30°C through 70°C under air convection without a fan. Delivering an extremely low no load power consumption, it allows the end system to easily meet the worldwide energy requirement. It has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

• AC input range selectable by switch
• Withstand 300VAC surge input for 5 seconds
• Protections: Short circuit / Overload/ Over Voltage
• Cooling by free air convection
• Miniature size and ultra low profile
• Compliance to IEC/EN 60335-1(PD3) and IEC/EN61558-1, 2-16 for household appliances
• High efficiency, Long life and high reliability

LED 3 Channel Driver is a 350W enclosed type power supply with low profile design. Adopting the full range 90-132VAC/180-264VAC input by switch, it provides an output voltage line of 24V.

It has high efficiency up to 88%, the design of metallic mesh case enhances the heat dissipation of STVOFL32024D that the driver operates from -25°C through 70°C under air convection with a fan. Delivering an extremely low no load power consumption, it allows the end system to easily meet the worldwide energy requirement. It has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

• AC input range selectable by switch
• Withstand 300VAC surge input for 5 seconds
• Protections: Short circuit / Overload/ Over Voltage/ Over Temperature
• Forced air cooling by built-in DC fan
• Ultra low profile
• High efficiency, Long life and high reliability