Close
0 items
You have no items in your shopping cart.
OUR LED PRODUCTS
    Filters
    Preferences
    Search

    LED Standard Tape Lights 12V DC 16 ft Reel

    $34.99
    Our Commercial Grade LED Standard Tape Lights are made with commercial-grade PCBs to ensure our LED strips lasts longer and runs cooler with high consistency and even illumination. It is perfectly designed for tradeshow decoration, exhibition lighting, retail display lighting, back-lighting applications, and more. Cuttable every 2” on specified cut marks. You can utilize LED strip light joiner and power feed for a solder-free installation. Available in 16.4 ft. reels with various CCT and color options to choose from. 12V DC LED Driver is required, see related products.
    SKU: STVO12R1
    *

    Step 1 Dezigns Commercial Grade LED Standard Tape Lights are perfect for a wide variety of lighting applications such as trade show, exhibition, and retail displays. It can be used with Step 1 Dezigns LED Tape light connectors and accessories, see related products. The LED Standard Tape Light gives you the freedom to easily design and install lighting for almost any surface or objects. 

    The LED Standard Tape Light is fully dimmable when used with Step 1 Dezigns LED Dimmable Drivers, see related products. It is UL listed to ensure the durability and safety of the LED tape light lifespan. 

    The LED Standard Strip Lights are made with wire leads on the ends of each 16 ft reel and can be cut every 2 inches at its cut marking points, allowing you to cut pieces to the length desired.

    Features:

    • Maintenance-free
    • Solid-State Construction
    • High shock and Vibration Resistance
    • SMD 3528 LED Chips are high intensity, ultra-bright, and energy-efficient
    • No RF interference
    • Up to 50,000 hours Lifespan

    Applications:

    • Decorative Lighting for Tradeshows, Exhibition, Retail Displays
    • Architectural lighting for corridors, canopies, archways, or windows
    • Downlighting or Uplighting Applications
    • Backlighting or Edge-Lighting
    • Under-cabinet, Under-Counter, or cove lighting
    • Custom DIY projects
    Products specifications
    Voltage 12V DC
    Power Consumption 2.4w per ft.
    Color Temperature 6000k Cool White
    4100k Natural White
    3000k Warm White
    2700k Extra Warm White
    Red, Green, Blue, or Amber
    Brightness 265 Lumen per ft.
    Beam Angle 120°
    Dimmable Yes, with Dimmable Driver
    Dimension 5/16" W. x 1/16" H.
    Length 16' L per Roll
    Lifespan ± 30,000 - 50,000 hours
    Required Power Supply 12v LED Driver (Sold Separately)
    Remarks Cuttable every 2"
    LED Chip Size 3528
    Number of LED Chips 18 per ft.
    Environment/IP Rating Dry Location IP20
    Additional Items Required 6" Power Feed STVO12PF, 6" Joiner STVO12J, Direct Connector STVO12DC, 6ft Mounting Channel STVOFLCH, 6ft Frost Acrylic Lens Cover STVOFLFR, Sold Separately
    Mounting High-adhension stckyback tape. Simply peel off the wax paper and stick it to any clean, dry substrate surface.

    Choosing the compatible power supply for LED Tape lights can be a challenge. Step 1 Dezigns LED tape light strips are either 12V DC or 24V DC which require a constant low voltage power supply to run the led strips. The LED power supply (also known as LED driver or transformer) which connects to a 120V AC power source and converts the current to 12V or 24V DC. The most commonly used voltage used in commercial or residential application is 12V DC or 24V DC. The Low voltage output provides the most safety and protection and consumes less current.

    Let’s start with the basics. The LED power supply is to provide the correct amount of electrical current to LED lights so that they do not overheat or fail prematurely due to overloading. It also regulates the flow of current to your tape lights to ensure the best functionality. Since Step 1 Dezigns LED strips are customizable in different lengths and sizes, and the compatible LED power supply would depend on the LED tape lights Voltage and wattage. All LED Strips are Dimmable when used with compatible LED driver.

    Follow the step by step instructions and example in Orange to find out which power supply will be suitable for your application.

    Important Factors to consider when selecting the right LED Driver:

    1. Input Voltage of the LED Driver: 110-277V AC
    2. Output Voltage of the LED Driver: 12V DC or 24V DC
    3. Power Consumption of the LED Strip Light (Wattage per ft)
    4. Total Run of LED Strip Light (Total Length in ft)
    5. Dimmable or Non-Dimmable

    *You can find the above factors from each product page or specification sheet on our Web Site. The recommend the max run of LED strips light is 32 ft before requiring an additional power supply.

    Step 1. Check the Voltage of your LED Tape Light. Determine if the LED tape light is 12V DC or 24V DC. Check for markings indicated on the LED strip or the product specifications at step1dezigns.com. This step is very important because of the wrong supply voltage could be a safety hazard or cause malfunction of the tape light.

    For our example project, we will use 6 ft of the 12V DC LED Standard Tape Light.

    Step 2. Check the watts per ft. This is also important in determining what size of LED Driver you will require. If you have insufficient power feeding to the LED strips, it may cause a flicker, or diming, or will not light up at all. The power consumption can be found in the product specifications.

    Step 3. To Calculate the power usage, use the following formula:

    Power (watts per ft) x Length (ft) = Total Power Consumption (Watts)

    So in our continued example, the 12V DC LED Standard Tape Light is rated at 2.4w/ft, so:

    2.4 w/ft x 6 ft= 14.4 watts

    Step 4. When selecting the LED power supply, it's always advisable to de-rate the power load by 10% to increase the lifespan of the LED Driver. This can be done by dividing the total power or wattage of the LED strip by 0.9.

    Our continued example would be 14.4w / 0.9 = 16 watts minimum driver capacity.

    Step 5. Once you have identified voltage and calculated the total power consumption, you can select the power supply which would depend on your installation or application. Step 1 Dezigns offer a wide variety of LED Drivers including dimmable and non-dimmable drivers.

    To complete our example, the required driver for this application would be a 12V DC LED Driver that has a minimum of the required 16 watts load.

    Visit our LED Drivers page to see our selection.

    If you have any questions about choosing your power supply, please do not hesitate to give us a call at 949-270-0250 or email [email protected].

     

    *
    *
    *

    Step 1 Dezigns Commercial Grade LED Standard Tape Lights are perfect for a wide variety of lighting applications such as trade show, exhibition, and retail displays. It can be used with Step 1 Dezigns LED Tape light connectors and accessories, see related products. The LED Standard Tape Light gives you the freedom to easily design and install lighting for almost any surface or objects. 

    The LED Standard Tape Light is fully dimmable when used with Step 1 Dezigns LED Dimmable Drivers, see related products. It is UL listed to ensure the durability and safety of the LED tape light lifespan. 

    The LED Standard Strip Lights are made with wire leads on the ends of each 16 ft reel and can be cut every 2 inches at its cut marking points, allowing you to cut pieces to the length desired.

    Features:

    • Maintenance-free
    • Solid-State Construction
    • High shock and Vibration Resistance
    • SMD 3528 LED Chips are high intensity, ultra-bright, and energy-efficient
    • No RF interference
    • Up to 50,000 hours Lifespan

    Applications:

    • Decorative Lighting for Tradeshows, Exhibition, Retail Displays
    • Architectural lighting for corridors, canopies, archways, or windows
    • Downlighting or Uplighting Applications
    • Backlighting or Edge-Lighting
    • Under-cabinet, Under-Counter, or cove lighting
    • Custom DIY projects
    Products specifications
    Voltage 12V DC
    Power Consumption 2.4w per ft.
    Color Temperature 6000k Cool White
    4100k Natural White
    3000k Warm White
    2700k Extra Warm White
    Red, Green, Blue, or Amber
    Brightness 265 Lumen per ft.
    Beam Angle 120°
    Dimmable Yes, with Dimmable Driver
    Dimension 5/16" W. x 1/16" H.
    Length 16' L per Roll
    Lifespan ± 30,000 - 50,000 hours
    Required Power Supply 12v LED Driver (Sold Separately)
    Remarks Cuttable every 2"
    LED Chip Size 3528
    Number of LED Chips 18 per ft.
    Environment/IP Rating Dry Location IP20
    Additional Items Required 6" Power Feed STVO12PF, 6" Joiner STVO12J, Direct Connector STVO12DC, 6ft Mounting Channel STVOFLCH, 6ft Frost Acrylic Lens Cover STVOFLFR, Sold Separately
    Mounting High-adhension stckyback tape. Simply peel off the wax paper and stick it to any clean, dry substrate surface.